I was just replacing my license plate frame and lost grip on one of the nuts holding the frame (picture attached below), it fell down but never made it to the ground, I looked around and noticed two holes on the interior side of the swingarm (picture attached below) and I believe that is where it ended up. There is no way I could reach in there fully to get the nut and now I have two questions if anyone knows:https://sarkariresult.onl/Mobdrohttps://pnrstatus.vip/
why are those holes there?
2) how bad is it to ride around with that nut bouncing around on the inside of the swingarm?
Last edited by mayusmeena; 06-24-2019 at 02:43 PM.